Cut the two heating wire and temperature control pin and riveting, the other end of the two heating wire and sheath line and riveting black line
winding
The over-glued needle-punched cotton slices are placed according to the position shown in the bottom drawing wireframe, and the release paper is uncovered
Tangent line
Put the heating wire on the tangent machine, set the parameters and quantity can start tangent
Front lane sewing hot line
Guide the layout into the embroidery machine computer to set the parameters, the non-woven fabric along the embroidery frame from right to left, pull the non-woven fabric into the frame, press the switch, the fixed heating wire rolled into the scroll, pres
Test resistance
Measure the size of the heater with a ruler, according to Bom and the sample as the standard size, measure it in the specifications, then it is qualified product, otherwise it is defective
生産設備
名前
いいえ
数量
検証済み
Wire bending machine
HBT-5025
1
Oil press
QL526.25T
1
Automatic computer special embroidery machine
PI-6213-W-1.5M
3
検証済み
工場情報
工場規模
1,000-3,000 square meters
生産国/地域
No.1779, Jilong Road, Xinmin Town, Tong 'an District, Xiamen City